46" Slow Flyer with Speed 400 motor and gear reduction.
This is the GWS EP easy build ARF Slow Stick Park Flyer
with the EPS400C power system.
For Beginner to Intermediate Modeler/Fliers.
FEATURES: Wings: One-piece foam construction
Landing gear: Pre-bent one piece wire with two 76.2mm diameter wheels
and one 25.4mm diameter tail wheel and tail skid wire.
Hardware: All necessary hardware included
Motor and gearbox with preinstalled plastic mount
Can be constructed with a removable tail also as a glider
Warranty: GWS guarantees this kit free from defects in both
materials and workmanship at the date of purchase
INCLUDES: Fuselage channel, EPS-400C motor system, EP-10x6 prop
main landing gear, tail skid wire, main wheels(76.2mm), tail wheel
(25.4mm), spinner, rubber bands all necessary hardware and
photo-illustrated instructions
REQUIRES: Speed Control: 10-12 amp
Battery: 2/3 AA cells 270-400mAh or AA cells 600mAh 7.2V
2mm Bullet Connectors, GPMM3110
Deans Micro 2R Plug, WSDM3007
Charger: Timed or Peak for 2/3 AA cells
Radio: 2-4 Channel
Servos: 2 Naro,Micro,or Mini servos
(1-elevator, 1-rudder)
Misc. Items: Building and field equipment
Required for removable tail units in addition to the above is a
electric drill,hacksaw and 1mm drill bit.
SPECS: Wingspan: 46.3"(1176mm)
Wing Area: 505.9sq in (32.64 sq dm)
Weight: 11.9-15.5 oz(338-440 grams)
Wing Loading: 3.39oz/sq ft (10.3g/sq dm)
Length: 37.6" (954mm)
Center of Gravity: 3-3/4" (95mm) back from the wing's leading edge
CG for Glider Version: 2½"-3¾" (65-95mm) from the wing's leading
edge dependent on wind conditions
Control Throws:
Elevator: Up & Down 20°
Rudder: Right & Left 35°
COMMENTS: This is the version that includes the EPS400C power system with
the EP-1060 (10x6) prop.